Thompson Altamira Pearl 19" Antique Satin Gold and Burnished Nickel Bathroom Sink - PBC-1815ASG

PRIMARY DIMENSIONS
Depth: 6", Outer: 18 3/4" x 15 3/4", Inner: 15" x 12", Drain: 1.5"

Download the Thompson spec sheet (PDF)

Thompson installation guide (PDF)

FEATURES

• Handcrafted 18 gauge construction
• Antique satin gold with burnished nickel detailing
• 18¾" x 15¾" footprint
• 6" deep basin
• Fits a standard 1.5" bathroom drain

Caring for a Sealed Finish

Thompson classes this as a Sealed finish: it is protected by a coating, so the color will not patina or change over time. A little care keeps the coating looking new.

• Everyday: clean with mild soap, water and a soft cloth, then rinse and dry straight away to prevent water spots and mineral marks.
• Optional: a carnauba wax (such as Flitz Wax) adds protection and preserves the sheen.
• Avoid: copper or metal polishes, Bar Keepers Friend, Wright's Copper Cream, regular household cleaners, steel wool and abrasive pads. They can damage the protective layer.

Thompson's Finish Guide (PDF) lists approved cleaners for every finish.

Before You Buy

• Handmade means unique. Each piece is made by hand, so expect small variations in size, texture and color from the photos.
• Mounting. Thompson designs this sink to be installed three ways: as a vessel on top of the counter, as a partial drop-in where the bowl sits partly below the counter, or as a full drop-in. Vessel and partial drop-in installs need a tall vessel faucet or a wall-mounted faucet.
• Drain. Takes a standard 1.5" bathroom drain. Thompson's matching grid and pop-up drains are available in coordinating finishes.
• Questions? Call us at 1-800-359-4460. You'll talk to a real person who knows these sinks.

Made by Hand in Santa Clara del Cobre

Thompson's metalsmiths trained in the tradition of Santa Clara del Cobre, a mountain town in Michoacán, Mexico, where copper has been worked by hand since the 1500s. The P'urhépecha people of the region were among the most advanced metalworkers of the pre-Hispanic world, and many of today's coppersmiths are their descendants.

The traditional process is slow: the metal is heated, hammered, cooled and heated again, over and over, until the form is right. Each small dimple is the mark of a single hammer strike, which is why no two Thompson pieces are ever exactly alike.

Antique satin gold is one of Thompson's most demanding finishes. Only certain craftsmen are able to apply it.

Common Questions

Will the finish change over time?

No. This is a sealed finish, so it will not patina. Gentle cleaning and drying after use keeps the coating looking as it did on day one.

Do I need a professional installer?

Thompson recommends that all of its sinks are installed by a licensed professional, following Thompson's installation guide (linked above). If your installer has questions about cutouts or support, we can get answers from Thompson for you.

Why might my sink look a little different from the photos?

Each piece is made by hand, so size, texture and color vary slightly from piece to piece and from the photos. Those small differences are the signature of handmade work, not a defect.

DETAILS